Barsham Nickel Alloys is a reputable manufacturer and supplier of premium nickel alloy products in Doha, Qatar. We are experts in Inconel X-750 pipes, which have high strength, corrosion resistance, and high-temperature performance. These pipes are suitable for harsh conditions and provide durability and reliability. For the highest quality standards, we perform stringent testing, such as chemical composition analysis, mechanical testing, hardness testing, and ultrasonic inspection. Our rigorous quality control systems ensure that each Inconel X-750 pipe adheres to industry standards of superior performance and long-term stability.
Inconel X-750 Pipes consist of Nickel (70% min), Chromium (14-17%), Iron (5-9%), Titanium (2.25-2.75%), Aluminum (0.4-1%), Niobium (0.7-1.2%), with trace contents of Manganese, Silicon, Cobalt, and Sulfur, providing superb corrosion and oxidation resistance. These pipes have better mechanical properties, such as tensile strength of 1267 MPa (184 ksi), yield strength of 868 MPa (126 ksi), and an elongation of 25%. With a density of 8.28 g/cm³ and a melting point of 1393-1427°C, Inconel X-750 pipes provide excellent thermal stability, stress corrosion resistance, and long-term reliability.
| Standards : | ASTM B167, B517 / ASME SB167, SB517 |
| Dimensional : | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| Seamless Pipe Size : | 1 / 2″ NB – 16″ NB |
| Welded Pipe Size : | 1 / 2″ NB – 24″ NB |
| Outside Diameter : | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| Pipe Type : | Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded |
| Thickness Range : | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Pipes End : | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Value Added Services : | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Al | C | Cr | Co | Cu | Fe | Mn | Nb | Ni | Ti | S | Si |
| 0.40-1.0 | .08 max | 14.0-17.0 | 1.00 max | 0.50 max | 5.0-9.0 | 1.00 max | 0.70-1.20 | 70.0 min | 2.25-2.75 | .01 max | .50 max |
| Ultimate Tensile Strength | .2% Yield Strength | Elongation % |
| 1250 MPa, 181000 psi | 850 MPa, 123000 psi | 30 |
| STANDARD | UNS | WNR. |
| Inconel X-750 | N07750 | 2.4669 |
| Density | Melting Range | Curie Temperature,°F | Magnetic Permeability, 70°F, 200H | Linear Contraction during Precipitation Treatment(1300°F/20hr), in/in | ||||
|---|---|---|---|---|---|---|---|---|
| lb/in3 | g/cm3 | °F | °C | As hot-rolled | As Hot-Rolled | Hot-Rolled | 20% Cold-Rolled | Annealed |
| 0.299 | 8.28 | 2540-2600 | 1393-1427 | -225 | 1.0020 | 0.00044 | 0.00052 | 0.00026 |
Barsham Nickel Alloys is the biggest manufacturer and supplier of Inconel X-750 Pipe in Doha, Qatar. With high-quality, long-lasting, and corrosion-resistant products. Precision and reliability are ensured through our advanced manufacturing technology. We maintain industry standards and supply products on time with excellent customer service. Focused on quality and innovation, we supply reliable solutions to address the changing requirements of our customers.
Contact us to get a quick quote for your requirement.
Inconel Alloy X-750 Pipes are extensively employed in high-temperature and stress conditions because of their high strength, corrosion resistance and oxidation resistance. They are best suited for steam turbines, nuclear reactors, heat exchangers, and jet engine parts, where long-lasting performance under severe conditions is needed. They are also used in springs, fasteners, and industrial furnaces, providing consistent performance under extreme conditions. With greater resistance to thermal fatigue, oxidation, and stress corrosion cracking, Inconel X-750 pipes offer reliable solutions for challenging industrial and engineering applications.
