Barsham Nickel Alloys is a well-known producer and distributor of high-quality nickel alloy products in Doha, Qatar, providing top-grade materials for industrial needs. Our Inconel 601 fasteners are specifically made for higher strength, oxidation resistance and high-temperature properties. In the manufacturing process, every fastener is thoroughly tested, including chemical composition inspection, tensile strength testing, and hardness testing, to ensure maximum quality and reliability. We focus on accuracy at each stage of the process to provide strong and consistent Inconel 601 fasteners that conform to the highest standards of excellence.
Inconel 601 Fasteners consist mainly of nickel (58-63%), chromium (21-25%) and iron, with a small amount of added aluminum (1-1.7%) for increased oxidation resistance, together with traces of titanium and copper. Mechanically, these fasteners are of high tensile strength (as high as 1030 MPa), good yield strength (350-450 MPa), and good elongation (up to 40%). Physically, Inconel 601 fasteners contain a high melting point (~1370°C), have low thermal expansion, and are highly resistant to thermal and mechanical fatigue, making them suitable for high-temperature and corrosive conditions.
| Specifications | ASTM B166 / ASME SB166 |
|---|---|
| Fasteners size | Bolt / Screw Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Nuts Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Washers Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Machine Screws Size : M1.6 – M12 Self Tapping Screw Size : No.2 – No. 14 |
| Fasteners Length | 3 mm to 200 mm |
| Fastener Threads | UNF, BSW, BSF, METRIC, UNC or as required |
| Standard of High Nickel Alloy Fasteners | DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Hex nuts |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Surface Coating | Ptfe Coated High Nickel Alloy Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Fasteners Finishing | High Nickel Alloy : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), High Nickel Alloy, Sherardized, some special one like DACROMET |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Barsham Nickel Alloys is the biggest manufacturer and supplier of Inconel 601 Fasteners in Doha, Qatar. With high-quality, long-lasting, and corrosion-resistant products. Precision and reliability are ensured through our advanced manufacturing technology. We maintain industry standards and supply products on time with excellent customer service. Focused on quality and innovation, we supply reliable solutions to address the changing requirements of our customers.
Contact us to get a quick quote for your requirement.
Inconel Alloy 601 Fasteners are utilized in corrosive and high-temperature environments where oxidation resistance and strength are crucial. They are normally utilized in heat exchangers and gas turbines. Where they can withstand harsh environments. They are also optimally suited for holding parts in power generation equipment, chemical processing equipment and industrial machinery. Their excellent thermal fatigue and scaling resistance makes them irreplaceable in maintaining the integrity and reliability of critical systems subjected to high temperatures and aggressive environments.
