Home > Rene 41 Sheets and Plates
Barsham Nickel Alloys is a renowned Doha, Qatar-based manufacturer and supplier of high-grade nickel-based alloys that offer bespoke solutions to various types of industries. We specialize in products like Rene 41 Sheets and Plates, which are known for their high strength, thermal stability at high temperatures, and oxidation resistance. These products find extensive application in aerospace, power generation, and other stringent industries. At Barsham Nickel Alloys, we prioritize timely delivery, ensuring that our customers receive top-notch products tailored to their specific needs and requirements.
Rene 41 Sheets and Plates are a nickel-based, high-strength superalloy containing 55% nickel, 20% chromium, 14% cobalt, and other traces of molybdenum, titanium, and aluminum. The mechanical properties have a tensile strength of 180-220 ksi, yield strength of 130-160 ksi, and elongation of 10-15%. Physical properties have a density of 8.51 g/cm³, thermal conductivity of 12 W/m·K, and a melting point of approximately 1300°C. Rene 41 has a superior resistance to oxidation at elevated temperatures and supports greater strength at severe conditions and is thus very suitable for power generation and aerospace uses.
| Standard Specification : | AMS 5545, AMS 5712, AMS 5713, AMS 5800, EN 2.4973, GE B50T59, GE B50TF109, GE B50TF76, UNS N07041, Werkstoff 2.4973 |
| Dimensions : | AMS |
| Sheets Thickness : | Range from .008″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Sheets/Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets/Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Cr | Ni | Mo | Co | Al | Ti | B | C | Fe | Mn | Si | S | Cu | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIN | 18.00 | — | 9.00 | 10.00 | 1.40 | 3.00 | 0.003 | — | — | — | — | — | — |
| MAX | 20.00 | Balance | 10.50 | 12.00 | 1.80 | 3.30 | 0.01 | 0.12 | 5.00 | 0.10 | 0.50 | 0.015 | 0.50 |
| Mechanical & Physical Properties | 21°C | 427°C | 538°C | 649°C | 760°C | 871°C | 982°C |
|---|---|---|---|---|---|---|---|
| Ultimate Tensile Strength /MPa | 1261.7 | – | – | 1117 | 1048 | 710.2 | – |
| 0.2% Yield Strength /MPa | 820.5 | – | – | 765.3 | 751.5 | 579.2 | – |
| Elongation % | 21 | – | – | 14 | 14 | 11 | – |
| Coefficient of Thermal Expansion µm/m⁰C | – | 13.3 | 13.7 | 14.3 | 15.1 | 15.5 | 16.7 |
| Thermal Conductivity /kcal/(hr.m.°C) | – | 14.4 | 16.1 | 17.9 | 19.6 | 21.4 | – |
| Modulus of Elasticity / x105 MPa | – | 2 | 1.93 | 1.79 | 1.72 | 1.65 | 1.52 |
Barshamn Nickel Alloys is the biggest manufacturer and supplier of Rene 41 Sheets and Plates in Doha, Qatar. With high-quality, long-lasting, and corrosion-resistant products. Precision and reliability are ensured through our advanced manufacturing technology. We maintain industry standards and supply products on time with excellent customer service. Focused on quality and innovation, we supply reliable solutions to address the changing requirements of our customers.
Contact us to get a quick quote for your requirement.
Rene 41 Sheets and Plates are commonly employed in power generation and aerospace industries because they have outstanding high-temperature strength and oxidation resistance. They are usually present in turbine blades, engine parts, and exhaust systems where extreme performance is required. Rene 41 is also applied in high-stress environments like gas turbines, heat exchangers, and components subjected to high temperatures. The toughness of the alloy makes it suitable for military, nuclear, and industrial uses that demand reliability under extreme conditions.
